截止阀国家标准

标准编号

标准中文名称

标准英文名称

DL/T531-1994（2005复审）

电站高温高压截止阀、闸阀技术条件

GB/T11689-1989

船用法兰铸钢截止阀（四进位）

Marine cast steel flanged stop valves

GB/T12235-1989

通用阀门法兰连接钢制截止阀和升降式止回阀

General purpose industrial valves—Flanged steel globe valves and lift check valves

GB/T12233-1989

通用阀门铁制截止阀与升降式止回阀

General purpose industrial valves—Casting iron globe valves and lift check valves

GB/T1951-1984

船用低压外螺纹青铜截止阀

Marine low pressure bronze male threaded stop valves

GB/T2499-1993

船用法兰铸铁双排截止阀箱

Marine cast iron flange dual-row stop valves-case

GB/T590-1993

船用法兰铸铁截止阀

Marine cast iron flanged stop valves

GB/T594-1983

船用外螺纹锻钢截止阀

Marine forged steel male thread stop valves

GB/T584-1999

船用法兰铸钢截止阀

Marine cast steel flanged stop valves

GB/T595-1983

船用外螺纹青铜截止阀

Marine bronze male thread stop valves

GB/T587-1993

船用法兰青铜截止阀

Marine bronze flanged stop valves

JB/T7245-1994

制冷装置用截止阀

JB/T7747-1995

针形截止阀

JB/T9081-1999

空气分离设备用低温截止阀和节流阀技术条件

JB/T53165-1999

高压平衡截止阀 产品质量分等

JB/T53174-1999

截止阀 产品质量分等

JB/T53155-1999

空气分离设备用低温截止阀和节流阀 产品质量分等

JB/T8859-2004

截止阀 静压寿命试验规程

HG/T3215-1986

聚三氟氯乙烯塑料衬里截止阀

NF E29-350-2003

工业用阀.钢制球阀、球状截止阀和止回阀

（Industrial valves - Steel globe and globe stop and check valves.）

NF P43-001-2000

建筑物用阀门.建筑物中供应引用水用铜合金截止阀.试验和要求

（Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.）

NF D36-380-2001

燃气燃烧器和燃气用具用自动截止阀的阀门检验系统

（Valve proving systems for automatic shut-off valves for gas burners and gas appliances.）

NF A84-621-2002

气焊设备.焊接、切割和相关工艺用带截止阀的速动连接

（Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.）

NF M88-771-1975

液化烃容器装置.手动截止阀.制造.功能.试验

（LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.）

NF P43-002-1981

建筑物水管阀门.水表截止阀.一般技术规范

（VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.）

BS EN 13709-2003

工业用阀.钢制球阀、球状截止阀和止回阀

（Industrial valves - Steel globe and globe stop and check valves）

BS 1552-1995

一类、二类和三类燃气用手动截止阀规范

（Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar）

BS 7461-1991

带有流量调节器、闭路开关指示、闭合位置指示器开关或气流量控制的电动自动气体截止阀规范

（Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control）

BS 1010-2-1973

给排水设施用排放旋塞和截止（旋压式）阀规范.第2部分:排放旋塞和地面上用截止阀

（Specification for draw-off taps and stopvalves for water services （screw-down pattern） - Draw-off taps and above-ground stopvalves）

BS 1873-1975

石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀（有法兰及对接焊端）规范

（Specification for steel globe and globe stop and check valves （flanged and butt-welding ends） for the petroleum, petrochemical and allied industries）

BS 3457-1973

水与截止阀座垫圈材料规范

（Specification for materials for water tap and stopvalve seat washers）

DIN 4817-1-1981

液态气的截止阀.概念.安全技术要求.检验.标志

（Shut off valves for liquefied gases; definitions, requirement, testing, marking）

DIN 86251-1998

造船用铸铁制带法兰的DN15至500的截止阀

（Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500）

DIN 86260-1998

造船用炮铜制带法兰DN15至500的截止阀

（Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500）

DIN 85003-4-1997

造船用管件的交货技术条件.第4部分:截止阀

（Technical specifications for valves for shipboard use - Part 4: Stop valves）

DIN 85003-6-1997

造船用管件的交货技术条件.第6部分:手动截止阀

（Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves）

DIN 3399-1986

低压截止阀.安全技术要求和检验

（Gas low-pressure cut-off valves; safety requirements, testing）

DIN 3160-1974

公称压力25的冷却剂循环直通截止阀

（Through-valves for refrigerant circuits, nominal pressure 25 bar）

DIN 3161-1974

公称压力25的冷却剂循环角形截止阀

（Elbow valves for refrigerant circuits; nominal pressure 25 bar）

DIN 4056-1992

水管.街道地下截止阀门的路盖.DVGW技术规范

（Water pipelines; valve boxes for stop valves; DVGW code of practice）

DIN EN 1643-2001

燃气燃烧器和燃气用具用自动截止阀的阀门检验系统

（Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000）

DIN 86500-1968

船用螺纹连接的截止阀和闸阀等概述

（Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding）

DIN 86254-2000

船只及造船技术.超轻型截止阀DN32-DN125（PN10）

（Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10）

DIN EN 13709-2003

工业用阀.钢制球阀、球状截止阀和止回阀

（Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002）

DIN EN 1213-1999

建筑阀门.建筑物中饮用水供应用铜合金截止阀.试验和要求

（Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999）

DIN 86266-2002

船舶和航海技术.用手夹紧和法兰连接的超轻型法兰的截止阀

（Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10）

GB/T1856-1993

船用法兰铸铁单排排出截止阀箱

Marine flanged cast iron single arrangement exhaust stop box valve

GB/T1854-1993

船用法兰铸铁单排吸入截止阀箱

Marine flanged cast iron single arrangement suction stop box valve

JIS B8605-2002

致冷装置的截止阀

（Stop valves for refrigerants）

JIS F7379-1996

造船.卡套式30K黄铜截止阀

（Shipbuilding -- Brass 30K stop valves with bite joint（s））

JIS E4103-1988

铁路车辆用截止阀

（Cut-out cocks for railway rolling stock）

JIS E4114-1989

铁路车辆用青铜截止阀

（Bronze stop valves for railway rolling stock）

QB/T3880-1999

卫生洁具、暖气直角式截止阀技术条件

Technical requirements for sanitariness ware and heating angle valve

QB/T3881-1999

卫生洁具、暖气直角式截止阀型式和尺寸

Shapes and dimensions of sanitariness ware and heating angle valve

JB/T10530-2005

氧气用截止阀